Eagle Creek Culvert in West Vancouver was experiencing severe failure along culvert invert which could potentially cause above ground failure. The project was determined to be high priority due to close proximity residential properties that had been constructed on the …
See Project
The Highways Department had two culverts in need of rehabilitation near the Chilliwack Airport. Both cross under the Highway One Freeway and replacing via Open Cut techniques was not a practical solution. The first culvert to be repaired was located at …
See Project
While rehabilitating the Trans Canada Airport Culvert, it was decided to employ a full Sliplining method in order to repair the second culvert. New culvert pipes that are slightly smaller than the existing culvert were delivered to the south end …
See Project
Throughout the 1950's and 60's the City of Richmond had a program of infilling their ditches with large cast-in-place box culverts. These concrete culverts are in great shape but their joints are failing. Over the years this has caused continuous …
See Project
The Highway 99 Oak Street Bridge project is a classic example of our signature process -- "The Culvert Way" . For a deep dive click here.
See ProjectSubscribe to our newsletter for cutting-edge industry updates, expert knowledge, and exclusive content.
